YASKAWA
Showing all 11 results
-
CIMR-J1000 series
Quick ViewThe J1000 meets all automation requirements for compact applications with variable speed operation and energy-saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
- Stall Prevention Functions for stable operation during changes of load or power supply
- Over-Excitation Braking for quick deceleration without external braking resistor
- Detects load and automatically adjusts torque regardless the actual speed conditions
-
CIMR-L1000 series
Quick ViewRise to the Top – Yaskawa L1000 lift drives are the solution to technical requirements of today’s elevators. This lift drive controls induction and permanent magnet motors. It is the first choice for new installation, machine room less lifts, but also for modernization. Experience the proven Yaskawa reliability combined with a new level of ride comfort.
-
CIMR-U1000 series
Quick ViewU1000 is the perfect match for single motor drive applications with requirements to power regeneration and low harmonics such as lifts, escalators, HVAC machinery, hoists, centrifuges, and many others.
U1000 is approved for global marine installation. Compared to 12 pulse systems the Yaskawa matrix design provides significant footprint and weight savings, keeping the THDi within the IEEE 519 limits.
-
CIMR-V1000 series
Quick ViewThe Yaskawa V1000 is a general-purpose AC drive covering the demands of a wide field of applications including Open-Loop-Vector functionality and the use of PM motors without feedback.
- High flux braking for 50% reduction of braking time
- Online Auto-Tuning to optimize for improved motor performance at low speed
- Open Loop Vector Control for PM motor operation
- Safe Disable Inputs for Safe Torque OFF
-
F7, J7 seriesA
Quick View1/8 – 5 HP
The J7 drive was a general purpose AC drive; its PWM design provided low motor noise and high starting torque, with a current overload rating of 150% for 60 seconds. V/f control made this drive suitable for most general applications. The J7 was feature-packed, low cost, and compact. The digital operator included a 3-digit LED status display. Digital programming covered 79 parameters. The J7 had five digital inputs (3 progammable), 1 analog input, and 1 digital output (programmable). An optional RS-485 Modbus RTU serial communication port was available. An ideal choice whenever low cost and small size were required.
